Dryer Vent Cleaning: Water in the Vent Line
I met with an proprietor at one of his properties the other evening who’d a big water issue using his dryer vent line. Once fulfilling the master, he took me to his basement opened up a closet. There was a elastic dryer hose dangling directly in the front of the face in a significant U formation. The Owner explained,”I presume there was water in here.”
Obviously
, that can be precisely why his Tenants were experiencing difficulties drying their clothes.
I caught the nozzle , jostled it forth and back, and the noise of plain water made a whooshing sound, it felt just like that there were just two gallons of water from the vent line. The weight of this a huge sum of drinking water led to the duct line to sag to a few feet over the floor. Fortunately, the hose didn’t yet break and cause water damage all over the floor.
I thought to the home clean dryer vent,”The builder has to have been very lazy because he should never of put in this kind of flexible dryer vent line from the walls. He should’ve installed the stiff metal form of drier duct” Unfortunately, contractors occasionally install the elastic transparency kind of duct line from walls, also have been known to some times exit the dryer duct into attics that’s quite dangerous.
When a flexible vent is put in rather than the rigid metal variety, if there is only a tiny water erosion out of drying clothes, then this water could develop and start to sag the vent line. And as soon as the duct line starts, it only hastens more and more drinking water. Alas , the water will totally clog the vent line when it sags, and totally block the warmth. Whenever there is an airflow blockage because of water buildup, it can badly damage a drier and make even a effective brand new drier unworthy.
Sometimes, the drinking water may also come from the exterior once the outside protect isn’t sealed correctly and rainwater pours into the dryer duct. The easy solution for this is to seal the exterior vent cap using clean caulk or maybe to put in a fresh bathtub. The port cover for this particular homeowner had been under a overhang wherever rain would not reach it, or so the drinking water has been coming out of his outfits. Commonly, water condensation in the duct line isn’t a problem, but as he had a elastic hose in the walls, the slightest quantity of water compelled it to sag and trap a growing number of drinking water.
I caught a sizable plastic bucket, then set it below the sagging port line, took out a pen, and popped it using a hole. It almost felt as a surgical procedure. The water flow from the duct lineup and also into the skillet along with a blend of lint. After all of the water drained, I simply recorded the hose up with port tape.
After fixing the water dilemma I moved on my regular cleansing procedure and then thrown out that the port line from the interior, and set my blower in the port point , and proceeded to brush it from the outside. On-line blew out, and also the air-flow resumed in the vent line and was blowing off out powerful.
https://www.youtube.com/watch?v=Wf5lZc_u-vY